![P-Trap Vs. S-Trap Drain Pipes: What Are The Major Differences? (1) P-Trap Vs. S-Trap Drain Pipes: What Are The Major Differences? (1)](https://i0.wp.com/upgradedhome.com/wp-content/uploads/2021/03/shutterstock_1183754734.jpg?size=720x845&nocrop=1)
Whether you are building a home or remodeling an older home, you should understand drain configurations when deciding on plumbing. A licensed plumber is involved with the contractor or builder, but you should know what is up to code. Understanding the main differences between a P-trap and S-trap will help to ensure your home is a safe environment.
A P-trap is a U-shaped pipe in toilets and sinks to connect the drain to the sewer system. On the other hand, an S-trap has the same purpose as the P-trap, but it forms into an S-shape. Due to safety hazards, S-traps are no longer up to code in new builds or renovations.
Do You Need to Hire a Plumber?
Get free, zero-commitment quotes from pro contractors near you.
What Are Drain Traps?
The purpose of drain traps is to provide a water barrier between the inside of your home and the sewer. The drain trap retains a small amount of water each time the sink drains. The water barrier’s intention is to keep any sewer gases from entering your home.
There are several different types of drains. An ideal drain trap will be able to resist any damage and household chemicals. It will also be able to prevent foul smells, insects, and parasites from entering your home, as well as rodents.
An ideal drain trap will also be able to self-clean. Quality drain traps have a long service life, are easy and quick to install, and economical.
What Is A P-Trap?
P-traps are U-shaped pipes in toilets and underneath sinks. They connect the drain to a home septic tank or the sewer system. P-traps hold a small amount of water to prevent sewer gases from rising into the home.
What Is an S-Trap?
![P-Trap Vs. S-Trap Drain Pipes: What Are The Major Differences? (3) P-Trap Vs. S-Trap Drain Pipes: What Are The Major Differences? (3)](https://i0.wp.com/upgradedhome.com/wp-content/uploads/2021/03/shutterstock_134565629.jpg?size=720x845&nocrop=1)
The S-trap is similar to a P-trap, but it lacks a horizontal arm. Instead, it curves down and then down again, forming into an S-shape. This trap connects the drainpipe to the floor.
What Are The Main Differences Of P-Traps And S-Traps
In the chart below, you can find the main differences between P-traps and S-traps.
P-Traps vs. S-Traps | ||
Quality | P-Trap | S-Trap |
Waste Reserved Location | Reserves little to no water in the trap. | Reserves wastewater in the trap. |
Water Waste | Uses a small amount of water to drain the waste. | Uses a large amount of water to drain the waste. |
Preference | P-traps are preferred. | S-traps are no longer up to code. |
Size | P-traps are smaller in size. | S-traps are larger than P-traps. |
Ability for Sink to Save Water | The sink doesn’t have to save water. | The sink has to save water. |
Odor | There is no odor associated with the p-trap. | The s-trap can release a foul odor. |
Maintenance | Does not require maintenance. | Requires frequent regular maintenance. |
Installation | The draining system outlet installs in the wall. | The draining system outlet installs in the floor. |
Housing Codes Of P-Traps And S-Traps
Each type of trap has its housing code. Therefore, we decided to share those with you below so you can see the differences and know what is expected for each one.
Housing Codes For A P-Trap
P-traps are now used instead of S-traps, especially under sinks. P-traps eliminated the siphoning issue discovered with most S-traps. Two main features in the P-trap stop siphoning.
Vented Pipe
The first feature of the P-trap is a vented pipe. The P-trap vents inside a wall and through the roof to the outside of your home. When air pressure balances throughout the inside of the drain, siphoning becomes less likely.
Added Extension
The second feature is an extension added to the drain side of the trap. The extended pipe reduces the possibility of gravity pulling water through the pipe. This is known as a waste arm extension.
The required length of the waste arm extension is 2 to 2.5 times the diameter of the pipe. If your drainpipe is 1 – 1.5 inches, the waste arm extension should be at least 3 inches long. This ensures a proper P-trap configuration.
Are S-Traps Still Up To Code?
S-traps no longer meet code and are illegal in all new construction. S-traps are now illegal because siphoning can happen when a large amount of water drains. Siphoning pulls water through the pipe and leaves the bottom of the trap dry.
Leaking Odors
When a trap is dry, gas and odors can travel through the drain pipe and into your home. These gases are methane, hydrogen sulfide, and ammonia which are found in sewers. Not only do these gasses have a bad odor, but they are also poisonous and explosive.
Pest Invasion
Furthermore, pests can enter your home without some sort of barrier. It may seem unlikely for vermin to travel through the pipes, but without anything stopping them, they can succeed.
What Are The Risks Associated With P-Traps And S-Traps?
Each trap has risks associated with them such as methane gas leaks, and other issues if the pipes are not installed correctly. This is why it’s so important you ensure the pipes are correct otherwise you’ll have serious problems.
What Are The Risks Of A P-Trap?
Improperly installed P-traps can become damaged and leak toxic sewer smells into your home. There are several issues associated with incorrectly installed P-traps.
Dry P-traps can happen when the trap has lost its water seal and sewer gasses build up through the drain. Clogged P-traps are the product of a drain that runs too slow. If left untreated, leaky P-traps can occur and produce foul smells.
What Are The Risks Of An S-Trap?
As mentioned before, plumbing codes have now banned S-trap configurations in modern plumbing. The risk of water being siphoned out of the trap and releasing gas into your home has become too high.
This problem has existed for more than 100 years, which is why in 1880, authorities began to address it. They then developed and enforced plumbing and sanitation codes as well as drainage requirements. Some of these requirements and codes we still use today.
How Do You Choose Between A P-Trap And An S-Trap?
While the P-trap and S-trap are used for the same purpose, they are very different. When deciding between the two, you should keep housing codes and risks in mind.
S-traps are no longer allowed in new construction or the remodeling of a home. The S-trap does not meet housing code requirements, and most inspectors will not pass the S-trap during an inspection.
The P-trap is the right choice when deciding which trap you need. The S-trap can allow poisonous sewer gasses into your home due to its design. It can also allow vermin to enter your home if the trap goes dry for a long period.
How Do You Convert An S-trap To A P-trap?
Sometimes an S-trap to P-trap conversion is necessary. If you decide to convert your drain trap, you need to change two aspects of the drain. The first thing you need to do is add a waste arm extension, then you need to vent the pipe.
Vent Stack
Installing a vent stack can be difficult and costly, but it’s worth it. If installing a vent stack isn’t currently in your budget, there are alternatives. You can use an air admittance valve (AAV) to equalize pressure inside the drain.
Air Admittance Valve
An air admittance valve allows air to enter the drain pipe’s waste side but prevents sewer gasses from releasing. Make sure to check your local code before installing an air admittance valve, as some areas do not allow them.
What Other Types Of Traps Are Used In Plumbing?
People use several other types of traps in plumbing, but they each have a different purpose. While P-traps and S-traps focus on sewerage, there are also floor traps, gully traps, bottle traps, and grease traps.
Floor Trap
Floor traps are located in the floor to collect wastewater from the bathroom, wash areas, and kitchen sink.
A gully trade is used outside of a building and connected to an external sewerage line. It also collects wastewater from the kitchen and bathroom areas.
Bottle Trap
A bottle trap receives waste from the bathroom, kitchen sinks, and other appliances that don’t have a built-in trap.
A grease trap installs in the waste pipe from one or more fixtures to separate grease from the liquid. It then retains the grease.
Do You Need to Hire a Plumber?
Get free, zero-commitment quotes from pro contractors near you.
Does Installation Of Traps Require Plumbing Permits?
Each county or parish is different, but most require a permit if it is a big plumbing job. If you are replacing your water heater, the city considers this a large job. There are water heater safety codes that need to be observed, so this will require a permit.
Re-piping is a large project and requires you to change out all water supply pipes in the home. These jobs are usually done by a professional plumber and require a permit. Another job that requires a permit is drain line replacements.
Replacing Sewer Lines
When replacing sewer lines, expect to get a permit. Any work involving sewer lines requires a permit because you need to meet specific safety codes.
When moving existing plumbing, you will need a permit. This is considered a remodel, so there are building codes you have to follow.